Baseline-systems FlowStation Manual do Utilizador descarregar pdf (Página 7)

Baseline FlowStation User Manual

2 – Installing Shared Flow Components

Installing the FlowStation and Communication Module

Install the FlowStation enclosure and the communication module according to the instructions that

came with the equipment.

Make sure the FlowStation is powered up and the communication module is connected.

To find the required tasks for setting up the FlowStation, refer to the section on Configuring the

FlowStation on page 11 of this User Manual.

Installing the Shared Flow biCoders

Connect a 3200UPG-SF biCoder to the two-wire path of each BaseStation 3200 irrigation controller

that will be part of the shared flow group. Refer to the installation guide that came with the

biCoder.

The BaseStation 3200 controller recognizes that the Shared Flow biCoder has been installed, and

the controller enables the shared flow features.

Installing the BaseStation 3200 Irrigation Controllers

Refer to the BaseStation 3200 User Manual to install and set up the controllers.

To find the required tasks for setting up the BaseStation 3200 to use shared flow, refer to the

section on Configuring the BaseStation 3200 Irrigation Controller for Shared Flow on page 4 of this

User Manual.

2 – Installing Shared Flow Components Page 3

1 2 3 4 5 6 7 8 9 10 11 12 ... 40 41

Sem comentários

Baseline-systems FlowStation Manual do Utilizador Página 7